ATMEGA32A-PN vs ATMEGA32L-8PC Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATMEGA32A-PN sa pamamagitan ng Microchip Technology at ATMEGA32L-8PC sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATMEGA32A-PN - 8-bit AVR MCU 32KB Flash 16MHz 40-DIP | Microchip
ATMEGA32A-PN ✓ NakahandaMicrochip Technology
ATMEGA32L-8PC - 8-Bit AVR MCU 8MHz 32KB Flash 40-PDIP | Microchip
ATMEGA32L-8PC ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATMEGA32A-PN | ATMEGA32L-8PC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Program Memory (Flash) | 32 KB (16K x 16) | — |
| SRAM | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB |
| Maximum CPU Speed | 16 MHz | — |
| Operating Voltage | 4.5 V to 5.5 V | — |
| Number of I/O Pins | 32 | — |
| ADC | 8-channel, 10-bit | 8-channel 10-bit |
| Timers/Counters | Two 8-bit + One 16-bit | — |
| Packhaging | 40-pin PDIP (0.600 in / 15.24 mm) | 40-PDIP (P) |
| Uri ng Pagpapasok | Through-Hole | Through Hole |
| Communication Interfaces | USART, SPI, TWI (I2C) | — |
| Debug Interface | JTAG (IEEE 1149.1) | — |
| Programmable Lock Bits | Yes (software security) | — |
| Flash Endurance | 10,000 write/erase cycles | — |
| EEPROM Endurance | 100,000 write/erase cycles | — |
| Temperature na Operasyon | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Tindminan RoHS | Compliant | — |
| Maksimum na Taktiko ng Oras | — | 8 MHz |
| FLASH Program Memory | — | 32 KB (16K x 16) |
| Operating Voltage Range | — | 2.7 V to 5.5 V (ATMEGA32L) |
| Instructions | — | 131 instructions, most single-cycle |
| General Purpose Working Registers | — | 32 x 8-bit |
| General Purpose I/O Lines | — | 32 |
| JTAG Interface | — | On-chip-debug and boundary scan |
| Active Mode Current | — | 1.1 mA (1 MHz, 3 V, 25 C) |
| Idle Mode Current | — | 0.35 mA (1 MHz, 3 V, 25 C) |
| Power-down Mode Current | — | < 1 uA |
| Throughput | — | Up to 8 MIPS at 8 MHz |
| Programmability | — | In-System Programmable (ISP) FLASH, self-programming |