ATMEGA48PA-AUR vs ATMEGA168V-10AI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48PA-AUR द्वारा Microchip Technology और ATMEGA168V-10AI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48PA-AUR - 8-Bit AVR MCU 4KB Flash 20MHz | Microchip
ATMEGA48PA-AUR ✓ सक्रियMicrochip Technology
ATMEGA168V-10AI - AVR 8-bit MCU 16KB Flash 1.8V 10MHz TQFP-32 | Microchip
ATMEGA168V-10AI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48PA-AUR | ATMEGA168V-10AI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | AVR 8-bit RISC |
| Program Memory Size | 4 KB Flash (2K x 16) | — |
| EEPROM | 256 B | 512 B |
| SRAM | 512 B | 1 KB |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 20 MHz | 10 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V | — |
| Supply Voltage (5V operation) | 4.5 V to 5.5 V | — |
| General Purpose I/O Lines | 23 | — |
| General Purpose Working Registers | 32 x 8-bit | — |
| Instruction Set | 131 powerful instructions, most single clock cycle | — |
| ADC | 6-channel 10-bit | 8-channel 10-bit |
| Timer/Counters | Three flexible timer/counters with compare modes | — |
| Serial Interfaces | SPI, USART, 2-wire (I2C compatible) | — |
| Analog Comparator | One on-chip | — |
| Watchdog Timer | Programmable with separate on-chip oscillator | — |
| Internal Oscillator | Calibrated, 8 MHz | — |
| Flash Endurance | 10,000 write/erase cycles | — |
| EEPROM Endurance | 100,000 write/erase cycles | — |
| Data Retention | 20 years at 85 C | — |
| पैकेज | 32-TQFP (7x7 mm) | TQFP-32 (7x7 mm), gull-wing leads |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40 C to +85 C (industrial) | -40C to +85C (industrial) |
| RoHS स्थिति | Compliant (Green) | — |
| Flash Program Memory | — | 16 KB |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| Throughput | — | Up to 10 MIPS (1 MIPS per MHz) |
| Instructions | — | 131 instructions, most single-cycle |
| GPIO Count | — | 23 general purpose I/O lines |
| Timers/Counters | — | 3 (two 8-bit, one 16-bit) |
| Communication Interfaces | — | USART, SPI, Two-Wire Interface (I2C) |
| Debug System | — | debugWIRE on-chip debug |
| Working Registers | — | 32 x 8-bit general purpose |