ATMEGA48PA-AUR vs ATMEGA168V-10AI Karşılaştırma

Ayrıntılı yan yana karşılaştırma ATMEGA48PA-AUR tarafından Microchip Technology ve ATMEGA168V-10AI tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
ATMEGA48PA-AUR ATMEGA48PA-AUR - 8-Bit AVR MCU 4KB Flash 20MHz | Microchip

ATMEGA48PA-AUR - 8-Bit AVR MCU 4KB Flash 20MHz | Microchip

ATMEGA48PA-AUR ✓ Aktif
Microchip Technology
ATMEGA168V-10AI ATMEGA168V-10AI - AVR 8-bit MCU 16KB Flash 1.8V 10MHz TQFP-32 | Microchip

ATMEGA168V-10AI - AVR 8-bit MCU 16KB Flash 1.8V 10MHz TQFP-32 | Microchip

ATMEGA168V-10AI ✓ Aktif

Özellik Karşılaştırması

Parametre ATMEGA48PA-AUR ATMEGA168V-10AI
Marka Microchip Technology Microchip Technology
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
Core Architecture 8-bit AVR RISC AVR 8-bit RISC
Program Memory Size 4 KB Flash (2K x 16) —
EEPROM 256 B 512 B
SRAM 512 B 1 KB
Azami Saat Hızı 20 MHz 10 MHz
Operating Voltage Range 1.8 V to 5.5 V —
Supply Voltage (5V operation) 4.5 V to 5.5 V —
General Purpose I/O Lines 23 —
General Purpose Working Registers 32 x 8-bit —
Instruction Set 131 powerful instructions, most single clock cycle —
ADC 6-channel 10-bit 8-channel 10-bit
Timer/Counters Three flexible timer/counters with compare modes —
Serial Interfaces SPI, USART, 2-wire (I2C compatible) —
Analog Comparator One on-chip —
Watchdog Timer Programmable with separate on-chip oscillator —
Internal Oscillator Calibrated, 8 MHz —
Flash Endurance 10,000 write/erase cycles —
EEPROM Endurance 100,000 write/erase cycles —
Data Retention 20 years at 85 C —
Paket 32-TQFP (7x7 mm) TQFP-32 (7x7 mm), gull-wing leads
Montaj Türü Surface Mount Surface Mount
İşletim Sıcaklığı -40 C to +85 C (industrial) -40C to +85C (industrial)
RoHS Durumu Compliant (Green) —
Flash Program Memory — 16 KB
Supply Voltage Range — 1.8 V to 5.5 V
Throughput — Up to 10 MIPS (1 MIPS per MHz)
Instructions — 131 instructions, most single-cycle
GPIO Count — 23 general purpose I/O lines
Timers/Counters — 3 (two 8-bit, one 16-bit)
Communication Interfaces — USART, SPI, Two-Wire Interface (I2C)
Debug System — debugWIRE on-chip debug
Working Registers — 32 x 8-bit general purpose

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin