ATMEGA8515-16PJ vs ATMEGA8515L-8PI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA8515-16PJ द्वारा Microchip Technology और ATMEGA8515L-8PI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA8515-16PJ - 8-Bit AVR MCU 16MHz 8KB Flash | Microchip
ATMEGA8515-16PJ ✓ सक्रियMicrochip Technology
ATMEGA8515L-8PI - 8-bit AVR MCU 8KB Flash 40-DIP | Microchip
ATMEGA8515L-8PI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA8515-16PJ | ATMEGA8515L-8PI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR enhanced RISC |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 16 MHz | 8 MHz |
| Throughput | 16 MIPS at 16 MHz | Up to 8 MIPS at 8 MHz |
| Flash Program Memory | 8 KB (4K x 16) | 8 KB (4K x 16), In-System Programmable |
| SRAM | 512 B | — |
| EEPROM | 512 B | 512 B |
| External Memory Support | up to 64 KB SRAM | Up to 64 KB SRAM |
| General Purpose I/O | 35 lines | 35 programmable I/O lines |
| Working Registers | 32 x 8-bit | — |
| Instruction Set | 130 instructions, most single-cycle | 130 instructions, most single-cycle |
| Timers/Counters | Two flexible with compare modes + 8-bit Timer0 (OC0/PWM) | — |
| Communication Interfaces | UART, SPI | — |
| Interrupts | Internal and external interrupt sources | — |
| पैकेज | 40-PDIP | 40-PDIP (0.600 in, 15.24 mm) |
| माउंटिंग प्रकार | Through Hole | Through Hole |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | -40C to +85C (Industrial) |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range for -16PJ grade] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Internal SRAM | — | 512 B |
| Operating Voltage Range | — | 2.7 V to 5.5 V |
| Timers | — | One 16-bit (T1) and 8-bit Timer/Counters |
| Serial Interfaces | — | 1x USART, 1x SPI |
| External Interrupts | — | 3 (INT0-INT2) |
| Internal ADC | — | No |
| Debug/Programming | — | ISP via SPI; debug via MPLAB SNAP |
| Supply Current (Active) | — | [DATA_NEEDED: active supply current] |