ATMEGA88-15AD vs ATMEGA88PV-10AU तुलना
विस्तृत दोनों ओर की तुलना ATMEGA88-15AD द्वारा Microchip Technology और ATMEGA88PV-10AU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA88-15AD - 8KB Flash AVR MCU 16MHz 5V | Atmel/Microchip
ATMEGA88-15AD ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA88-15AD | ATMEGA88PV-10AU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | AVR 8-bit RISC | 8-bit AVR RISC |
| Flash Memory | 8 KB (ISP, read-while-write) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Maximum Clock Speed | 16 MHz | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 1.8 V to 5.5 V |
| General Purpose I/O | 23 lines | — |
| Working Registers | 32 x 8-bit | — |
| Instructions | 130 (most single-cycle) | — |
| Timers/Counters | Three flexible timer/counters | — |
| Package Type | TQFP, 7 x 7 mm, 1.0 mm height, 0.8 mm pitch | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Throughput | Up to 1 MIPS per MHz | up to 10 MIPS at 10 MHz |
| ADC | 6-channel 10-bit | 8-channel 10-bit |
| Serial Interfaces | USART, SPI, Two-Wire (I2C-compatible) | — |
| Life Cycle Stage | ACTIVE (newer device ATMEGA88A available) | — |
| Debug Interface | debugWIRE on-chip debug | — |
| Max Clock Frequency | — | 10 MHz |
| Flash Program Memory | — | 8 KB (4K x 16) |
| I/O Lines | — | 23 |
| Timers | — | 3 (two 8-bit, one 16-bit) |
| Communication Interfaces | — | USART, SPI, TWI (I2C) |
| पैकेज | — | 32-TQFP (7x7 mm, 0.8 mm pitch) |
| Debug / Programming | — | debugWIRE, ISP (In-System Programmable) |
| External Interrupts | — | 24 (per Xecor comparison data) |
| Technology | — | picoPower low-power |
| Instruction Count | — | 131 instructions, most single-cycle |
| RoHS स्थिति | — | Compliant |