ATSAM4L-XSTK vs ATSAMA5D2C-XULT तुलना
विस्तृत दोनों ओर की तुलना ATSAM4L-XSTK द्वारा Microchip Technology और ATSAMA5D2C-XULT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4L-XSTK - SAM4L Xplained Pro Cortex-M4 Kit | Microchip
ATSAM4L-XSTK ✓ सक्रियMicrochip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT Obsoleteविशेषता तुलना
| पैरामीटर | ATSAM4L-XSTK | ATSAMA5D2C-XULT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | MCU 32-bit Embedded Evaluation Board (Starter Kit) | Embedded MPU Evaluation Board |
| Kit Family | SAM4L Xplained Pro Starter Kit | — |
| Target MCU Family | ATSAM4L (AT91SAM4 / SAM4L series) | — |
| Core Processor | ARM Cortex-M4, 32-bit | ARM Cortex-A5 (SAMA5D2) |
| Core Frequency | up to 48 MHz | — |
| Active Mode Current | down to 90 uA/MHz (SAM4L MCU) | — |
| Sleep Mode | Full RAM retention (SAM4L MCU) | — |
| Display Controller | Segment LCD controller (SAM4L series) | — |
| On-board Debugger | EDBG (CMSIS-DAP, Virtual COM, Data Gateway) | Embedded J-Link OB |
| Expansion | Xplained Pro extension headers | — |
| Supported IDE | Atmel Studio / Microchip Studio, Atmel START | — |
| Instruction Set | ARM (Thumb-2) | — |
| माउंटिंग प्रकार | Standalone benchtop development board | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage] | — |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Core Architecture | — | 32-bit MPU |
| Maximum CPU Frequency | — | 500 MHz |
| On-board DRAM | — | 128 MB DDR2 SDRAM (1 Gbit) |
| On-board Flash | — | 32 MB QSPI NOR Flash (256 Mbit) |
| Ethernet | — | 10/100 Mbit with on-board PHY |
| USB | — | 2x USB 2.0 High-Speed (Host/Device) |
| Card Slot | — | 1x microSD |
| Display Interface | — | Parallel LCD connector (up to 4.3") |
| Audio | — | Line In / Line Out (on-board codec) |
| CAN | — | 2x CAN-FD |
| Expansion Headers | — | Arduino, RPi, MikroElektronika Click |
| Input Voltage | — | 5 V (USB DEBUG or external supply) |
| Packaging | — | Bulk (Box) |
| Product Status | — | Obsolete (per Octopart listing) |