ATSAM4S-XSTK vs ATSAME54-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAM4S-XSTK द्वारा Microchip Technology और ATSAME54-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ सक्रियMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4S-XSTK | ATSAME54-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | Evaluation Kit / Development Board |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | 160 KB | 256 KB with ECC (on target MCU) |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | — |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | — |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS स्थिति | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | — | 32-bit RISC |
| Maximum Clock Speed | — | 120 MHz |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |