ATSAM4S-XSTK vs ATSAME54-XPRO 비교
다음의 상세 나란히 비교: ATSAM4S-XSTK 제조: Microchip Technology 및 ATSAME54-XPRO 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ 활성Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ 활성사양 비교
| 파라미터 | ATSAM4S-XSTK | ATSAME54-XPRO |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Development Boards | Development Boards |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $159.80 | $80.40 |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | Evaluation Kit / Development Board |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | 160 KB | 256 KB with ECC (on target MCU) |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | — |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | — |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS 상태 | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | — | 32-bit RISC |
| Maximum Clock Speed | — | 120 MHz |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |