ATSAM4S-XSTK vs ATSAMG53-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAM4S-XSTK द्वारा Microchip Technology और ATSAMG53-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ सक्रियMicrochip Technology
ATSAMG53-XPRO - SAM G53 Xplained Pro ARM Cortex-M4 Evaluation Kit | Microchip
ATSAMG53-XPRO Obsoleteविशेषता तुलना
| पैरामीटर | ATSAM4S-XSTK | ATSAMG53-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | — |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | — |
| SRAM | 160 KB | 96 KB |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | EDBG (CMSIS-DAP / DGI) |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | — |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS स्थिति | Compliant | — |
| Board Type | — | Evaluation / Development Platform |
| Series | — | SAM G (Xplained Pro) |
| Target MCU | — | ATSAMG53N19A-AU |
| Core Processor | — | ARM Cortex-M4 with FPU |
| Operating Frequency | — | 48 MHz |
| Program Memory | — | 512 KB Flash |
| Core Width | — | 32-Bit |
| USB Interfaces | — | 1x USB-A host, 1x USB-B device |
| Storage | — | 1x microSD card socket |
| Expansion | — | Arduino R3 compatible header, 2x mikroBUS click sockets |
| User I/O | — | 4 LEDs, 2 mechanical buttons, 1 reset button |
| ऑपरेटिंग सप्लाई वोल्टेज | — | 5 V (USB powered) |
| ऑपरेटिंग तापमान | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS, FCC, IC, CE |
| Mounting | — | Bench / desk (no enclosure) |
| Packaging | — | Anti-static bag with quick-start guide |