ATSAM4SA16CA-CU vs ATSAM4S8CB-CFN तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SA16CA-CU द्वारा Microchip Technology और ATSAM4S8CB-CFN द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SA16CA-CU ✓ सक्रियMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SA16CA-CU | ATSAM4S8CB-CFN |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 with FPU and DSP | ARM 32-bit RISC |
| Bit Width | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1024 KB) | 512 KB (512K x 8) |
| SRAM | 160 KB | 128 KB |
| Instruction Cache | 2 KB | — |
| MPU (Memory Protection Unit) | Yes | — |
| GPIO Lines | 79 | — |
| पैकेज | 100-pin TFBGA (9x9 mm) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (BGA) |
| ऑपरेटिंग तापमान | -40C to +85C (Industrial) | — |
| सप्लाई वोल्टेज | 1.2 V core / 3.3 V I/O (typical) | — |
| External Bus Interface | 8-bit data, 24-bit address | 16-bit Static Memory Controller (EBI) |
| ADC Resolution | 12-bit | — |
| DAC Resolution | 12-bit | — |
| DMA Channels | Multi-channel DMA + Peripheral DMA Controller (PDC) | — |
| Communication Interfaces | USB 2.0 FS, EMAC 10/100, 4x USART, 3x TWI, 2x SPI, 1x HS-SPI | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| Instruction Set | Thumb-2, DSP extensions | — |
| RoHS स्थिति | Compliant | Compliant |
| Pin-to-Pin Compatibility | SAM3N, SAM3S (64/100-pin), SAM7S legacy | — |
| Core | — | ARM Cortex-M4 with FPU |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 120 MHz |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| CAN | — | 2x CAN 2.0A/B controllers |
| ADC | — | 12-bit, up to 16 channels, 1 Msps |
| DAC | — | 2x 12-bit DAC |
| Timers | — | Multiple 16-bit and 32-bit timers, PWM, RTC |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |