ATSAMA5D26C-CU vs ATSAMA5D2-XULT तुलना
विस्तृत दोनों ओर की तुलना ATSAMA5D26C-CU द्वारा Microchip Technology और ATSAMA5D2-XULT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMA5D26C-CU - 500MHz ARM Cortex-A5 MPU 289-LFBGA | Microchip
ATSAMA5D26C-CU ✓ सक्रियMicrochip Technology
ATSAMA5D2-XULT - SAMA5D2 Xplained Ultra Cortex-A5 MPU Eval Kit | Microchip
ATSAMA5D2-XULT Obsoleteविशेषता तुलना
| पैरामीटर | ATSAMA5D26C-CU | ATSAMA5D2-XULT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | Microprocessor (MPU) | — |
| Core | ARM Cortex-A5 (32-bit, single-core) | — |
| Maximum CPU Clock | 500 MHz | 500 MHz |
| Internal SRAM | 128 KB | — |
| Internal ROM | 160 KB | — |
| L1 Cache | 32 KB I-cache + 32 KB D-cache | — |
| External Memory Support | DDR2 / DDR3L / LPDDR2 / LPDDR3, QSPI, e.MMC | — |
| पैकेज | 289-LFBGA (14x14 mm, 0.8 mm ball pitch) | — |
| Supply Voltage (Core) | 1.2 V | — |
| Supply Voltage (I/O) | 3.3 V | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | — |
| Backup Mode Current | ~5 µA (per SAMA5D2 family datasheet) | — |
| Security Features | Secure boot, HW AES/SHA/TRNG, tamper pins | — |
| Display Controller | 24-bit LCD up to 1024x768 | — |
| Connectivity | 2x GMAC, 2x CAN-FD, USB Host/Device, 11x UART, I2S, SPI, I2C | Gigabit Ethernet, USB Device/Host, mikroBUS, Xplained Extension Headers |
| Camera Interface | MIPI CSI-2, 12-bit parallel | — |
| RoHS स्थिति | Compliant | Compliant |
| Manufacturer | — | Microchip Technology (formerly Atmel) |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Board Type | — | Embedded Evaluation Board / MPU Evaluation Kit |
| On-board MPU | — | SAMA5D27 ARM Cortex-A5 |
| Core Architecture | — | ARM Cortex-A5 with NEON SIMD engine |
| On-board RAM | — | 128 MB DDR3 SDRAM |
| On-board Storage | — | 4 GB eMMC Flash |
| Display Interface | — | LCD connector (RGB / LVDS) |
| Audio | — | Audio codec + Class-D amplifier interface |
| Image Sensor Interface | — | Yes (parallel image sensor connector) |
| Debug Interface | — | On-board debugger + JTAG/SWD |
| Software Support | — | MPLAB Harmony 3, Linux (linux4sam / Buildroot) |
| Packaging | — | Boxed kit (board + accessories) |
| Product Status | — | Obsolete (per Octopart listing) |