ATSAMA5D26C-CU vs ATSAMA5D2-XULT 비교
다음의 상세 나란히 비교: ATSAMA5D26C-CU 제조: Microchip Technology 및 ATSAMA5D2-XULT 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMA5D26C-CU - 500MHz ARM Cortex-A5 MPU 289-LFBGA | Microchip
ATSAMA5D26C-CU ✓ 활성Microchip Technology
ATSAMA5D2-XULT - SAMA5D2 Xplained Ultra Cortex-A5 MPU Eval Kit | Microchip
ATSAMA5D2-XULT Obsolete사양 비교
| 파라미터 | ATSAMA5D26C-CU | ATSAMA5D2-XULT |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Development Boards |
| 수명 주기 상태 | 활성 | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $11.80 | $72.00 |
| Product Type | Microprocessor (MPU) | — |
| Core | ARM Cortex-A5 (32-bit, single-core) | — |
| Maximum CPU Clock | 500 MHz | 500 MHz |
| Internal SRAM | 128 KB | — |
| Internal ROM | 160 KB | — |
| L1 Cache | 32 KB I-cache + 32 KB D-cache | — |
| External Memory Support | DDR2 / DDR3L / LPDDR2 / LPDDR3, QSPI, e.MMC | — |
| 패키지 | 289-LFBGA (14x14 mm, 0.8 mm ball pitch) | — |
| Supply Voltage (Core) | 1.2 V | — |
| Supply Voltage (I/O) | 3.3 V | — |
| 동작 온도 | -40C to +85C (industrial) | — |
| Backup Mode Current | ~5 µA (per SAMA5D2 family datasheet) | — |
| Security Features | Secure boot, HW AES/SHA/TRNG, tamper pins | — |
| Display Controller | 24-bit LCD up to 1024x768 | — |
| Connectivity | 2x GMAC, 2x CAN-FD, USB Host/Device, 11x UART, I2S, SPI, I2C | Gigabit Ethernet, USB Device/Host, mikroBUS, Xplained Extension Headers |
| Camera Interface | MIPI CSI-2, 12-bit parallel | — |
| RoHS 상태 | Compliant | Compliant |
| Manufacturer | — | Microchip Technology (formerly Atmel) |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Board Type | — | Embedded Evaluation Board / MPU Evaluation Kit |
| On-board MPU | — | SAMA5D27 ARM Cortex-A5 |
| Core Architecture | — | ARM Cortex-A5 with NEON SIMD engine |
| On-board RAM | — | 128 MB DDR3 SDRAM |
| On-board Storage | — | 4 GB eMMC Flash |
| Display Interface | — | LCD connector (RGB / LVDS) |
| Audio | — | Audio codec + Class-D amplifier interface |
| Image Sensor Interface | — | Yes (parallel image sensor connector) |
| Debug Interface | — | On-board debugger + JTAG/SWD |
| Software Support | — | MPLAB Harmony 3, Linux (linux4sam / Buildroot) |
| Packaging | — | Boxed kit (board + accessories) |
| Product Status | — | Obsolete (per Octopart listing) |