ATSAMA5D35-EK vs ATSAMA5D3-XPLD तुलना
विस्तृत दोनों ओर की तुलना ATSAMA5D35-EK द्वारा Microchip Technology और ATSAMA5D3-XPLD द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ सक्रियMicrochip Technology
ATSAMA5D3-XPLD - SAMA5D3 Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D3-XPLD ⚠ अंतिम खरीदविशेषता तुलना
| पैरामीटर | ATSAMA5D35-EK | ATSAMA5D3-XPLD |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | अंतिम बार खरीदें |
| Product Type | MPU Evaluation Board / Development Kit | Embedded Evaluation Board (Xplained Kit) |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | — |
| Maximum CPU Clock | 536 MHz | 536 MHz |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | 2x 10/100/1000 GMAC |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | 1x USB 2.0 Device, 2x USB 2.0 Host |
| CAN | 2x CAN-FD controllers | 2x CAN 2.0B |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | — |
| RoHS स्थिति | Compliant | — |
| Lead-Free | Yes | — |
| Target MPU | — | ATSAMA5D36 (ARM Cortex-A5) |
| Core | — | ARM Cortex-A5 with FPU |
| On-chip SRAM | — | 128 KB |
| Cache (I/D) | — | 32 KB each |
| External Memory Interface | — | DDR2 / LPDDR / LPDDR2 + NAND Flash + QSPI |
| Graphics Output | — | HDMI + parallel LCD |
| Storage | — | microSD slot + NAND Flash on-board |
| Expansion Headers | — | Arduino R3 + Xplained extension header |
| Debug Interface | — | On-board J-Link-OB (JTAG + SWD) + serial console |
| Operating System Support | — | Linux Mainline, Yocto Project, bare-metal C examples |
| Included Accessories | — | micro-AB to Type-A USB cable |
| ऑपरेटिंग तापमान | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS Compliant |