ATSAMD21E16C-UUTB4 vs ATSAMC21N18A-ANT तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21E16C-UUTB4 द्वारा Microchip Technology और ATSAMC21N18A-ANT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21E16C-UUTB4 - 48MHz Cortex-M0+ MCU 64KB Flash 35-WLCSP
ATSAMD21E16C-UUTB4 ✓ सक्रियMicrochip Technology
ATSAMC21N18A-ANT - 48MHz Cortex-M0+ MCU 256KB Flash TQFP-100 | Microchip
ATSAMC21N18A-ANT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21E16C-UUTB4 | ATSAMC21N18A-ANT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ | — |
| Operating Frequency (Max) | 48 MHz | — |
| Program Memory (Flash) | 64 KB | — |
| Data Memory (SRAM) | 8 KB | — |
| Data Width | 32-bit | — |
| पैकेज | 35-WLCSP (2.82 x 2.53 mm) | 100-pin TQFP (14x14 mm) |
| Supply Voltage Range | 1.62 V to 3.63 V | — |
| GPIO Count | 26 (per WLCSP ballout) | Up to 84 |
| ADC | 12-bit, up to 12 channels, 350 kSPS | — |
| DAC | 10-bit, 1 channel | — |
| USB Interface | USB 2.0 Full-Speed with on-chip transceiver | — |
| Serial Interfaces | 2x I2C, 2x SPI, 2x UART, 1x I2S | — |
| Timers | 1x 24-bit + 2x 16-bit + 2x 8-bit TC | — |
| DMA Channels | 12-channel DMAC | 7 |
| Event System Channels | 12 | — |
| Debug Interface | Serial Wire Debug (SWD), 2-pin | — |
| Functional Safety | FuSa (IEC 60730 Class B capable) | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | -40C to +105C (industrial) |
| माउंटिंग प्रकार | Surface Mount (WLCSP) | Surface Mount |
| RoHS स्थिति | ROHS3 Compliant | Compliant (Green) |
| Core | — | ARM Cortex-M0+ (32-bit, single-core) |
| Maximum CPU Clock | — | 48 MHz |
| Flash Memory | — | 256 KB (in-system self-programmable) |
| EEPROM Emulation Flash | — | 8 KB (independent self-programmable) |
| SRAM | — | 32 KB |
| Supply Voltage (VDD) | — | 2.7 V to 5.5 V |
| Communication Interfaces | — | 6x SERCOM (UART/SPI/I2C), 1x CAN-FD, USB, I2S |
| Analog Peripherals | — | 12-bit ADC, 10-bit DAC, comparators, op-amps, PTC |
| Multipliers | — | Single-cycle hardware multiplier |
| Memory Protection Unit (MPU) | — | Yes |
| Micro Trace Buffer | — | Yes |
| Functional Safety (FuSa) | — | Yes |