ATSAMD21E18A-MF vs ATSAMD21-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMD21E18A-MF द्वारा Microchip Technology और ATSAMD21-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMD21E18A-MF - 256KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD21E18A-MF ✓ सक्रियMicrochip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMD21E18A-MF | ATSAMD21-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M0+ (32-bit) | — |
| Series | SAM D21E | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 48 MHz | — |
| Flash Memory | 256 KB | — |
| SRAM | 32 KB | 32 KB |
| Operating Voltage Range | 1.6 V to 3.6 V | — |
| ऑपरेटिंग तापमान रेंज | -40C to +125C | — |
| पैकेज | 32-pin QFN (5x5 mm) | — |
| CoreMark Performance | 2.46 CoreMark/MHz | — |
| ADC | 12-bit, up to 20 channels | — |
| DAC | 10-bit | — |
| USB | USB 2.0 Full-Speed Device | — |
| SERCOM Interfaces | 6 configurable (I2C/SPI/UART) | — |
| DMAC Channels | 6 | — |
| Peripheral Touch Controller (PTC) | Yes | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount | — |
| Product Type | — | Evaluation Board (Xplained Pro) |
| Target MCU | — | ATSAMD21J18A |
| Core Processor | — | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | — | 48 MHz |
| Flash Memory (on-chip) | — | 256 KB |
| On-board SPI Flash | — | 1 MB |
| Low-frequency Crystal | — | 32.768 kHz |
| High-frequency Crystal | — | 12 MHz |
| Debug Interface | — | nEDBG (CMSIS-DAP) on-board |
| USB Connectors | — | 1x Micro-B (debug/CDC), 1x Micro-B (target) |
| Extension Headers | — | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) |
| User Inputs | — | 1x mechanical reset button, 1x user touch button |
| User Outputs | — | 1x user LED |
| Arduino-compatible Headers | — | Yes (subset of ATSAMD21J18A I/O) |
| Operating Voltage (target) | — | 3.3 V |
| Board Power Source | — | USB Micro-B |
| Supported IDEs | — | MPLAB X IDE, Atmel Studio 7, Atmel START |
| Form Factor | — | Xplained Pro standard (approx 88 mm x 53 mm) |