ATSAMR21-XPRO vs ATSAMD21-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAMR21-XPRO द्वारा Microchip Technology और ATSAMD21-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAMR21-XPRO - ATSAMR21G18A 802.15.4 2.4GHz Eval Kit | Microchip
ATSAMR21-XPRO ✓ सक्रियMicrochip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAMR21-XPRO | ATSAMD21-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Evaluation Kit / Development Board | Evaluation Board (Xplained Pro) |
| On-board MCU | ATSAMR21G18A | — |
| Core Architecture | ARM Cortex-M0+ 32-bit | — |
| Operating Frequency | Up to 48 MHz | — |
| Program Memory | 256 KB Flash | — |
| RAM | 32 KB SRAM | — |
| RF Frequency Band | 2.4 GHz ISM | — |
| RF Standard | IEEE 802.15.4 / Zigbee / 6LoWPAN | — |
| Modulation | O-QPSK (per IEEE 802.15.4 PHY) | — |
| RF Link Budget | 103 dB | — |
| MCU Package | 64-pin QFN | — |
| On-board Antenna | Integrated 2.4 GHz ceramic chip antenna | — |
| Debug Interface | On-board EDBG (USB to SWD + VCOM + DGI) | nEDBG (CMSIS-DAP) on-board |
| Host Interface | USB Micro-B | — |
| Form Factor | Xplained Pro (compatible with Xplained Pro extensions) | Xplained Pro standard (approx 88 mm x 53 mm) |
| Supported Software | Atmel Studio, Microchip Studio, ASF, BitCloud Zigbee PRO, IEEE 802.15.4 MAC | — |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | — |
| Target MCU | — | ATSAMD21J18A |
| Core Processor | — | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | — | 48 MHz |
| Flash Memory (on-chip) | — | 256 KB |
| SRAM | — | 32 KB |
| On-board SPI Flash | — | 1 MB |
| Low-frequency Crystal | — | 32.768 kHz |
| High-frequency Crystal | — | 12 MHz |
| USB Connectors | — | 1x Micro-B (debug/CDC), 1x Micro-B (target) |
| Extension Headers | — | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) |
| User Inputs | — | 1x mechanical reset button, 1x user touch button |
| User Outputs | — | 1x user LED |
| Arduino-compatible Headers | — | Yes (subset of ATSAMD21J18A I/O) |
| Operating Voltage (target) | — | 3.3 V |
| Board Power Source | — | USB Micro-B |
| Supported IDEs | — | MPLAB X IDE, Atmel Studio 7, Atmel START |