ATSAMR21-XPRO vs ATSAMD21-XPRO موازنہ
تفصیلی ساتھ ساتھ موازنہ از ATSAMR21-XPRO بذریعہ Microchip Technology اور ATSAMD21-XPRO بذریعہ Microchip Technology. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Microchip Technology
ATSAMR21-XPRO - ATSAMR21G18A 802.15.4 2.4GHz Eval Kit | Microchip
ATSAMR21-XPRO ✓ فعالMicrochip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ATSAMR21-XPRO | ATSAMD21-XPRO |
|---|---|---|
| برانڈ | Microchip Technology | Microchip Technology |
| زمرہ | Development Boards | Development Boards |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Evaluation Kit / Development Board | Evaluation Board (Xplained Pro) |
| On-board MCU | ATSAMR21G18A | — |
| Core Architecture | ARM Cortex-M0+ 32-bit | — |
| Operating Frequency | Up to 48 MHz | — |
| Program Memory | 256 KB Flash | — |
| RAM | 32 KB SRAM | — |
| RF Frequency Band | 2.4 GHz ISM | — |
| RF Standard | IEEE 802.15.4 / Zigbee / 6LoWPAN | — |
| Modulation | O-QPSK (per IEEE 802.15.4 PHY) | — |
| RF Link Budget | 103 dB | — |
| MCU Package | 64-pin QFN | — |
| On-board Antenna | Integrated 2.4 GHz ceramic chip antenna | — |
| Debug Interface | On-board EDBG (USB to SWD + VCOM + DGI) | nEDBG (CMSIS-DAP) on-board |
| Host Interface | USB Micro-B | — |
| Form Factor | Xplained Pro (compatible with Xplained Pro extensions) | Xplained Pro standard (approx 88 mm x 53 mm) |
| Supported Software | Atmel Studio, Microchip Studio, ASF, BitCloud Zigbee PRO, IEEE 802.15.4 MAC | — |
| RoHS اسٹیٹس | Compliant | Compliant |
| Lead-Free | Yes | — |
| Target MCU | — | ATSAMD21J18A |
| Core Processor | — | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | — | 48 MHz |
| Flash Memory (on-chip) | — | 256 KB |
| SRAM | — | 32 KB |
| On-board SPI Flash | — | 1 MB |
| Low-frequency Crystal | — | 32.768 kHz |
| High-frequency Crystal | — | 12 MHz |
| USB Connectors | — | 1x Micro-B (debug/CDC), 1x Micro-B (target) |
| Extension Headers | — | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) |
| User Inputs | — | 1x mechanical reset button, 1x user touch button |
| User Outputs | — | 1x user LED |
| Arduino-compatible Headers | — | Yes (subset of ATSAMD21J18A I/O) |
| Operating Voltage (target) | — | 3.3 V |
| Board Power Source | — | USB Micro-B |
| Supported IDEs | — | MPLAB X IDE, Atmel Studio 7, Atmel START |