BA728N vs LM2904N तुलना
विस्तृत दोनों ओर की तुलना BA728N द्वारा ROHM Semiconductor और LM2904N द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BA728N | LM2904N |
|---|---|---|
| ब्रांड | ROHM Semiconductor | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | ROHM Semiconductor | — |
| Part Number | BA728N | — |
| फ़ंक्शन | Dual operational amplifier | — |
| Number of Channels | 2 | — |
| Internal Phase Compensation | Yes (built-in) | — |
| Single-Supply Voltage Range | 3 V to 18 V | — |
| Dual-Supply Voltage Range | ±1.5 V to ±9 V | — |
| Common-Mode Input Range | Includes negative rail (single supply mode) | Extending to ground/VEE |
| Package Type | SIP-8 (Single In-line Package, 8-pin) | — |
| Pin Configuration | Industry-standard 8-pin dual op-amp | — |
| Low Power Consumption | Yes | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature] | [DATA_NEEDED: operating temperature range] |
| माउंटिंग प्रकार | Through-Hole (SIP) | Through-hole |
| RoHS स्थिति | Compliant | unknown |
| हैलोजन फ्री | [DATA_NEEDED: halogen free] | — |
| Lead-Free | Yes (per ROHM product line convention) | — |
| Datasheet Document Pages | 4 pages (per alldatasheet.com) | — |
| Amplifier Count | — | 2 amplifiers |
| Product Family Supply Designation | — | 26 V |
| Gain-Bandwidth Product | — | 1 MHz |
| टोपोलॉजी | — | Dual independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply or split supply |
| Power Drain | — | Low; numeric value [DATA_NEEDED: power drain] |
| आउटपुट प्रकार | — | Push-pull |
| पैकेज | — | 8-pin PDIP |
| Input Type | — | Differential |
| Product Classification | — | Standard general-purpose amplifier |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |