BA728N vs LM2904N Perbandingan
Perbandingan bersamaan detil BA728N dari ROHM Semiconductor dan LM2904N dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BA728N | LM2904N |
|---|---|---|
| Merek | ROHM Semiconductor | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | ROHM Semiconductor | — |
| Part Number | BA728N | — |
| Fungsi | Dual operational amplifier | — |
| Number of Channels | 2 | — |
| Internal Phase Compensation | Yes (built-in) | — |
| Single-Supply Voltage Range | 3 V to 18 V | — |
| Dual-Supply Voltage Range | ±1.5 V to ±9 V | — |
| Common-Mode Input Range | Includes negative rail (single supply mode) | Extending to ground/VEE |
| Package Type | SIP-8 (Single In-line Package, 8-pin) | — |
| Pin Configuration | Industry-standard 8-pin dual op-amp | — |
| Low Power Consumption | Yes | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature] | [DATA_NEEDED: operating temperature range] |
| Tipe Mounting | Through-Hole (SIP) | Through-hole |
| Status RoHS | Compliant | unknown |
| Bebas Halogen | [DATA_NEEDED: halogen free] | — |
| Lead-Free | Yes (per ROHM product line convention) | — |
| Datasheet Document Pages | 4 pages (per alldatasheet.com) | — |
| Amplifier Count | — | 2 amplifiers |
| Product Family Supply Designation | — | 26 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Topologi | — | Dual independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply or split supply |
| Power Drain | — | Low; numeric value [DATA_NEEDED: power drain] |
| Tipe Output | — | Push-pull |
| Paket | — | 8-pin PDIP |
| Input Type | — | Differential |
| Product Classification | — | Standard general-purpose amplifier |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |