BD3402KS2 vs BD3401KS2 तुलना
विस्तृत दोनों ओर की तुलना BD3402KS2 द्वारा ROHM Semiconductor और BD3401KS2 द्वारा ROHM Semiconductor. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
ROHM Semiconductor
BD3402KS2 - 2-Channel Audio Signal Processor | ROHM Semiconductor
BD3402KS2 Obsoleteविशेषता तुलना
| पैरामीटर | BD3402KS2 | BD3401KS2 |
|---|---|---|
| ब्रांड | ROHM Semiconductor | ROHM Semiconductor |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Product Type | 2-channel analog audio signal processor | Single Power Supply Sound Processor |
| Primary Application | Home-audio cassette recording and playback | — |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 8 V to 9.5 V | 8 V to 9.5 V |
| Power Supply Type | Single power supply | — |
| Built-In Preamplifier | Yes, for cassette recording and playback | — |
| Control Interface | 2-wire interface | — |
| Internal Circuit Count | 1 circuit | — |
| Audio Functions | Surround and bass boost | — |
| Mode Switching | Soft switching to reduce shock noise | — |
| Digital-Circuit Supply | Dedicated power-supply terminal for internal-state maintenance | — |
| Standby Current | [DATA_NEEDED: standby current] | — |
| पैकेज | 64-SQFP-T, 12 mm x 12 mm | 64-SQFP (12 x 12 mm) |
| Terminal Count | 64 terminals | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS compliance] |
| लाइफसाइकिल स्थिति | Obsolete | — |
| Audio Channel Count | — | 2 channels |
| Integrated Functions | — | Built-in preamplifier for tape recording and playback |
| Package Type | — | 64-LQFP |
| Manufacturer | — | ROHM Semiconductor |
| Datasheet Revision | — | Rev. A, 2010.10 |
| Maximum Microphone Output Voltage | — | 2.5 Vrms at THD = 1%, BW = 400 Hz to 30 kHz, MIC = ON |
| Minimum Microphone Output Voltage | — | 2.0 Vrms at THD = 1%, BW = 400 Hz to 30 kHz, MIC = ON |
| Microphone Total Harmonic Distortion | — | 0.01% typical, 0.1% maximum, BW = 400 Hz to 30 kHz, MIC = ON |
| Output Path 1 Voltage Gain | — | -8 dB to -4 dB, output at pin 55 |
| Output Path 2 Voltage Gain | — | -2 dB to 2 dB |
| ALC-Off Microphone Input Pins | — | 59 and 60 |
| ALC-Off Output Pins | — | 32 and 33 |
| Power Dissipation | — | [DATA_NEEDED: maximum power dissipation] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |