BD3402KS2 vs BD3401KS2 Perbandingan
Perbandingan bersamaan detil BD3402KS2 dari ROHM Semiconductor dan BD3401KS2 dari ROHM Semiconductor. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
ROHM Semiconductor
BD3402KS2 - 2-Channel Audio Signal Processor | ROHM Semiconductor
BD3402KS2 ObsoletePerbandingan Spesifikasi
| Parameter Umum | BD3402KS2 | BD3401KS2 |
|---|---|---|
| Merek | ROHM Semiconductor | ROHM Semiconductor |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Product Type | 2-channel analog audio signal processor | Single Power Supply Sound Processor |
| Primary Application | Home-audio cassette recording and playback | — |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 8 V to 9.5 V | 8 V to 9.5 V |
| Power Supply Type | Single power supply | — |
| Built-In Preamplifier | Yes, for cassette recording and playback | — |
| Control Interface | 2-wire interface | — |
| Internal Circuit Count | 1 circuit | — |
| Audio Functions | Surround and bass boost | — |
| Mode Switching | Soft switching to reduce shock noise | — |
| Digital-Circuit Supply | Dedicated power-supply terminal for internal-state maintenance | — |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Paket | 64-SQFP-T, 12 mm x 12 mm | 64-SQFP (12 x 12 mm) |
| Terminal Count | 64 terminals | — |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance] |
| Status Lingkungan Hidup | Obsolete | — |
| Audio Channel Count | — | 2 channels |
| Integrated Functions | — | Built-in preamplifier for tape recording and playback |
| Package Type | — | 64-LQFP |
| Manufacturer | — | ROHM Semiconductor |
| Datasheet Revision | — | Rev. A, 2010.10 |
| Maximum Microphone Output Voltage | — | 2.5 Vrms at THD = 1%, BW = 400 Hz to 30 kHz, MIC = ON |
| Minimum Microphone Output Voltage | — | 2.0 Vrms at THD = 1%, BW = 400 Hz to 30 kHz, MIC = ON |
| Microphone Total Harmonic Distortion | — | 0.01% typical, 0.1% maximum, BW = 400 Hz to 30 kHz, MIC = ON |
| Output Path 1 Voltage Gain | — | -8 dB to -4 dB, output at pin 55 |
| Output Path 2 Voltage Gain | — | -2 dB to 2 dB |
| ALC-Off Microphone Input Pins | — | 59 and 60 |
| ALC-Off Output Pins | — | 32 and 33 |
| Power Dissipation | — | [DATA_NEEDED: maximum power dissipation] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |