BSP452 vs BSP452HUMA1 तुलना

विस्तृत दोनों ओर की तुलना BSP452 द्वारा Infineon और BSP452HUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BSP452 BSP452 - 1.1A 60V Smart High-Side Switch | Infineon PROFET

BSP452 - 1.1A 60V Smart High-Side Switch | Infineon PROFET

BSP452 ✓ सक्रिय
Infineon
BSP452HUMA1 BSP452HUMA1 - 700mA Smart High-Side Switch SOT-223 | Infineon

BSP452HUMA1 - 700mA Smart High-Side Switch SOT-223 | Infineon

BSP452HUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BSP452 BSP452HUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (Classic PROFET 12V) Smart High-Side Power Switch
Technology N-channel vertical power FET with charge pump (Smart SIPMOS) —
Number of Channels 1 1
Input Compatibility CMOS compatible logic-level input, ground referenced —
Nominal Load Current 1.1 A —
DC Continuous Load Current (DigiKey listing) 700 mA —
Supply Voltage (Vbb) 60 V max (avalanche rated) —
On-Resistance (Rds(on)) [DATA_NEEDED: typical Rds(on) in mOhm] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] —
पैकेज PG-SOT223-4 (4-pin SOT-223 with tab) PG-SOT223-4 (3+Tab)
माउंटिंग प्रकार Surface Mount Surface Mount
Diagnostic Feedback Yes (status output) —
Protection Features Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery —
ESD Rating (HBM, per datasheet) Tested per MIL-STD-883D Method 3015.7 —
Load Dump Protection Per ISO 7637-1 and DIN 40839 —
Lead-Free / RoHS Yes (Infineon standard) —
Family — Classic PROFET 12V
Switch Type — N-Channel (integrated vertical power FET)
ऑपरेटिंग सप्लाई वोल्टेज — 5 V to 34 V
Continuous Load Current — 700 mA
On-State Resistance (RDS(on)) — 0.16 ohm (typical)
Automotive Qualification — AEC-Q100 qualified
Short-Circuit Protection — Yes (integrated)
Overvoltage Protection — Yes (clamp)
Overtemperature Protection — Yes (shutdown with hysteresis)
Overload Protection — Yes
ESD Protection — Yes (input pin)
Inductive Load Switching — Yes (with negative output clamp)
ऑपरेटिंग तापमान — -40 C to +150 C (junction)
MSL स्तर — 1 (per JEDEC J-STD-020)
RoHS स्थिति — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध