BSP742RIXUMA1 vs BTS3046SDRATMA1 तुलना

विस्तृत दोनों ओर की तुलना BSP742RIXUMA1 द्वारा Infineon और BTS3046SDRATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BSP742RIXUMA1 BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 ✓ सक्रिय
Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BSP742RIXUMA1 BTS3046SDRATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch Smart Low-Side Power Switch (HITFET family)
टोपोलॉजी 1:1 N-Channel High-Side —
Family miniPROFET —
Output Current (Nominal) 400 mA —
RDS(on) Typical at 25°C 250 mΩ —
ऑपरेटिंग सप्लाई वोल्टेज 5 V to 34 V —
Load Dump Tolerance 41 V —
Reverse Battery Protection -16 V —
On-State Resistance (max) [DATA_NEEDED: RDS(on) maximum at 25°C] —
करंट लिमिट [DATA_NEEDED: current limit typical value] —
थर्मल शटडाउन Yes with auto restart —
Overvoltage Protection Yes (including load dump) —
Short Circuit Protection Yes —
Open Load Detection Yes (diagnostic pin) —
Demagnetization of Inductive Loads Yes (internal) —
पैकेज PG-DSO-8-6 (SOIC-8, 3.90 mm body) PG-TO252-3-11 (DPAK, 3-pin with tab)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C -40 C to +150 C
MSL स्तर [DATA_NEEDED: MSL rating] —
RoHS स्थिति Compliant —
Manufacturer — Infineon Technologies
Switch Configuration — 1:1 N-Channel, single channel
Continuous Output Current — 3.6 A
On-State Resistance (Rds(on)) — 95 mOhm (0.095 ohm) typical
Operating Voltage Range (Vbb) — 4.5 V to 42 V
Load Type — Low-side switch (ground-referenced load)
Protection Features — Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD
Input Logic — CMOS-compatible with internal pull-down
Status Feedback — Yes (status output pin)
Automotive Qualification — AEC-Q100 (where variant specified)
RoHS / Lead-Free — Compliant / Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध