BTH61002EPAXUMA1 vs BTS70402EPGXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTH61002EPAXUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | BTH61002EPAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| टोपोलॉजी | Dual high-side switch (2 x 1:1) | — |
| Number of Channels | 2 | 4 |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | 3.5 A (typical) |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| पैकेज | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +150 C [DATA_NEEDED: junction T_max] | -40 °C to +150 °C junction |
| RoHS स्थिति | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| फ़ंक्शन | — | Smart High-Side Power Switch |
| आउटपुट कॉन्फ़िगरेशन | — | High-side, N-channel MOSFET |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |