BTH61002EPAXUMA1 vs BTS70402EPGXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTH61002EPAXUMA1 disebabkan oleh Infineon dan BTS70402EPGXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTH61002EPAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| Tetstruktur | Dual high-side switch (2 x 1:1) | — |
| Number of Channels | 2 | 4 |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | 3.5 A (typical) |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| Kemasan | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Gambaran Suhu Operasi | -40 C to +150 C [DATA_NEEDED: junction T_max] | -40 °C to +150 °C junction |
| Status RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Konfigurasi Output | — | High-side, N-channel MOSFET |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |