BTS118DATMA1 vs BTS52001ENAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS118DATMA1 द्वारा Infineon और BTS52001ENAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS118DATMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Part Number | BTS118DATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | Smart SIPMOS Low-Side Power Switch | — |
| टोपोलॉजी | 1:1 N-Channel Smart Low-Side Switch | — |
| Load Supply Voltage (Vbb max) | 42 V | — |
| Continuous Drain Current | 2.4 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) typical @ 25C] | 200 mΩ (typical) |
| Input Logic Level | CMOS / TTL compatible | — |
| Input Protection | ESD protected | — |
| Thermal Protection | Thermal shutdown with auto-restart | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection | Yes (Vbb transient) | — |
| Current Limitation | Yes | Yes (integrated) |
| Status Feedback | Open-drain diagnostic output (shared with IN) | — |
| पैकेज | PG-TO252-3-11 (DPAK) | PG-TDSO-8-31 (Exposed Pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान रेंज | -40C to +150C (junction) | -40 °C to +150 °C |
| RoHS / REACH | Green product, RoHS compliant, lead-free | — |
| MSL स्तर | MSL 3 (per JEDEC J-STD-020) | — |
| Product Type | — | Smart High-Side Power Switch |
| Family | — | Classic PROFET 12V |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 1 |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Diagnostic Output | — | Yes (status feedback) |
| Open-Load Detection | — | Yes (in OFF state) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |