BTS118DATMA1 vs BTS52001ENAXUMA1 비교
다음의 상세 나란히 비교: BTS118DATMA1 제조: Infineon 및 BTS52001ENAXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS118DATMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.78 | $0.82 |
| Part Number | BTS118DATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | Smart SIPMOS Low-Side Power Switch | — |
| 토폴로지 | 1:1 N-Channel Smart Low-Side Switch | — |
| Load Supply Voltage (Vbb max) | 42 V | — |
| Continuous Drain Current | 2.4 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) typical @ 25C] | 200 mΩ (typical) |
| Input Logic Level | CMOS / TTL compatible | — |
| Input Protection | ESD protected | — |
| Thermal Protection | Thermal shutdown with auto-restart | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection | Yes (Vbb transient) | — |
| Current Limitation | Yes | Yes (integrated) |
| Status Feedback | Open-drain diagnostic output (shared with IN) | — |
| 패키지 | PG-TO252-3-11 (DPAK) | PG-TDSO-8-31 (Exposed Pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40C to +150C (junction) | -40 °C to +150 °C |
| RoHS / REACH | Green product, RoHS compliant, lead-free | — |
| MSL 레벨 | MSL 3 (per JEDEC J-STD-020) | — |
| Product Type | — | Smart High-Side Power Switch |
| Family | — | Classic PROFET 12V |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| Number of Channels | — | 1 |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Diagnostic Output | — | Yes (status feedback) |
| Open-Load Detection | — | Yes (in OFF state) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |