BTS3046SDRATMA1 vs BTS462TATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3046SDRATMA1 द्वारा Infineon और BTS462TATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ सक्रिय
Infineon
BTS462TATMA1 BTS462TATMA1 - 3.5A Smart High-Side Power Switch | Infineon

BTS462TATMA1 - 3.5A Smart High-Side Power Switch | Infineon

BTS462TATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3046SDRATMA1 BTS462TATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
यूनिट मूल्य (USD) — $1.38
Product Type Smart Low-Side Power Switch (HITFET family) Smart High-Side Power Switch
Manufacturer Infineon Technologies Infineon Technologies
Switch Configuration 1:1 N-Channel, single channel —
Continuous Output Current 3.6 A —
On-State Resistance (Rds(on)) 95 mOhm (0.095 ohm) typical —
Operating Voltage Range (Vbb) 4.5 V to 42 V —
Load Type Low-side switch (ground-referenced load) —
पैकेज PG-TO252-3-11 (DPAK, 3-pin with tab) PG-TO252-5 (DPAK-5)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40 C to +150 C —
Protection Features Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD —
Input Logic CMOS-compatible with internal pull-down —
Status Feedback Yes (status output pin) —
Automotive Qualification AEC-Q100 (where variant specified) —
RoHS / Lead-Free Compliant / Yes —
Number of Channels — 1
आउटपुट कॉन्फ़िगरेशन — High-Side
Output Current (Continuous) — 3.5 A
On-State Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in mOhm]
Supply Voltage Range (Vbb) — 5 V to 34 V
Load Dump Protection — Yes
Overvoltage Protection — Yes
Overload / Current Limit — Yes
Short-Circuit Protection — Yes
थर्मल शटडाउन — Yes (with auto-restart)
Undervoltage Shutdown — Yes
Fast Demagnetization — Yes (for inductive loads)
Diagnostic Output (STATUS pin) — Yes
ऑपरेटिंग तापमान — -40 C to +150 C (junction)
MSL स्तर — [DATA_NEEDED: MSL rating]
RoHS स्थिति — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध