BTS3046SDRATMA1 vs BTS462TATMA1 비교
다음의 상세 나란히 비교: BTS3046SDRATMA1 제조: Infineon 및 BTS462TATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS3046SDRATMA1 | BTS462TATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.74 | $1.38 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| 패키지 | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-TO252-5 (DPAK-5) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40 C to +150 C | — |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | — |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Number of Channels | — | 1 |
| 출력 구성 | — | High-Side |
| Output Current (Continuous) | — | 3.5 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in mOhm] |
| Supply Voltage Range (Vbb) | — | 5 V to 34 V |
| Load Dump Protection | — | Yes |
| Overvoltage Protection | — | Yes |
| Overload / Current Limit | — | Yes |
| Short-Circuit Protection | — | Yes |
| 열 차단 | — | Yes (with auto-restart) |
| Undervoltage Shutdown | — | Yes |
| Fast Demagnetization | — | Yes (for inductive loads) |
| Diagnostic Output (STATUS pin) | — | Yes |
| 동작 온도 | — | -40 C to +150 C (junction) |
| MSL 레벨 | — | [DATA_NEEDED: MSL rating] |
| RoHS 상태 | — | Compliant |