BTS3050TFATMA1 vs BTS428L2ATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3050TFATMA1 द्वारा Infineon और BTS428L2ATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3050TFATMA1 BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 ✓ सक्रिय
Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3050TFATMA1 BTS428L2ATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Part Number BTS3050TFATMA1 —
Manufacturer Infineon Technologies —
Product Family HITFET Smart Low-Side Switch —
Switch Type N-Channel Low-Side Smart Power Switch —
आउटपुट की संख्या 1 —
RDS(on) (typ) 44 mOhm at 25 C —
Continuous Drain Current 4 A —
Load Voltage (max) 5.5 V —
Logic Input CMOS compatible, logic-level —
Status Output Yes (fault feedback) —
Protection Features Over-current, Over-temperature, Over-voltage, ESD —
ऑपरेटिंग तापमान -40 C to +150 C (junction) —
पैकेज PG-TO252-3-313 (TO-252 / DPAK) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
माउंटिंग प्रकार Surface Mount Surface Mount
AEC-Q100 Qualified —
RoHS Compliant —
Product Type — Smart High-Side Power Switch
Technology — Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Number of Channels — 1
Input Type — CMOS-compatible, ground-referenced
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
ऑपरेटिंग सप्लाई वोल्टेज — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: min/max]
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध