BTS3050TFATMA1 vs BTS428L2ATMA1 비교

다음의 상세 나란히 비교: BTS3050TFATMA1 제조: Infineon 및 BTS428L2ATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ 활성

사양 비교

파라미터 BTS3050TFATMA1 BTS428L2ATMA1
브랜드 Infineon Infineon
카테고리 Power MOSFET Drivers Power MOSFET Drivers
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $1.02 $1.45
Part Number BTS3050TFATMA1 —
Manufacturer Infineon Technologies —
Product Family HITFET Smart Low-Side Switch —
Switch Type N-Channel Low-Side Smart Power Switch —
출력 수 1 —
RDS(on) (typ) 44 mOhm at 25 C —
Continuous Drain Current 4 A —
Load Voltage (max) 5.5 V —
Logic Input CMOS compatible, logic-level —
Status Output Yes (fault feedback) —
Protection Features Over-current, Over-temperature, Over-voltage, ESD —
동작 온도 -40 C to +150 C (junction) —
패키지 PG-TO252-3-313 (TO-252 / DPAK) PG-TO252-5-11 (DPAK-5, 4 leads + tab)
실장 유형 Surface Mount Surface Mount
AEC-Q100 Qualified —
RoHS Compliant —
Product Type — Smart High-Side Power Switch
Technology — Smart SIPMOS (vertical N-channel MOSFET with charge pump)
Number of Channels — 1
Input Type — CMOS-compatible, ground-referenced
On-State Resistance (R_DS(on)) — 50 mOhm (typical)
Continuous Load Current — 5.8 A
동작 공급 전압 — [DATA_NEEDED: nominal and range]
Standby Current — Very low (per datasheet)
Overvoltage Protection — Load-dump / overvoltage clamp
Overtemperature Protection — Yes, with autorestart
Diagnostic Feedback — Yes (open-load, short-circuit, overtemperature)
동작 온도 범위 — [DATA_NEEDED: min/max]
RoHS / Pb-Free — Yes (Green product, Pb-free finish, J-STD-020)
Soldering — Pb-free reflow per IPC/JEDEC J-STD-020
Qualification — Automotive-grade (PROFET family)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청