BTS500801TEAAUMA1 vs BTS3110NHUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS500801TEAAUMA1 द्वारा Infineon और BTS3110NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTS500801TEAAUMA1 - 10A Smart High-Side Switch | Infineon PROFET
BTS500801TEAAUMA1 ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | BTS500801TEAAUMA1 | BTS3110NHUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Family | Classic PROFET (smart high-side switch) | — |
| टोपोलॉजी | 1:1 N-Channel high-side | — |
| Nominal Supply Voltage | 12 V | — |
| Load Supply Voltage Range | 4.5 V to 28 V | — |
| Continuous Load Current | 10 A | — |
| On-State Resistance (RDS(on)) | 10 milliohms (typical) | — |
| आउटपुट कॉन्फ़िगरेशन | High-side | — |
| Number of Channels | 1 | 1 |
| Fault Protection | Current limiting, over-temperature, over-voltage, reverse battery, ground loss, ESD | — |
| Diagnostic Output | Current sense (IS pin) | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 C to +150 C |
| पैकेज | PG-TO252-5-11 (DPAK-5, 4+Tab) | PG-SOT223-4 (SOT-223-4) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Packaging | Tape & Reel | — |
| Automotive Qualified | Yes (AEC-Q100 target application) | Yes - 12 V automotive applications |
| RoHS स्थिति | Compliant | Compliant |
| Power Transistor Technology | N-channel vertical power MOSFET with charge pump | — |
| Product Type | — | Smart Low-Side Power Switch |
| Family | — | Classic HITFET |
| Switch Type | — | N-Channel (1:1) |
| Maximum Drain-to-Source Voltage (VDS max) | — | 42 V |
| Continuous Drain Current | — | 1.4 A |
| On-Resistance (RDS(on) typ) | — | 200 mOhm |
| Input Logic Compatibility | — | TTL / CMOS (3.3 V and 5 V) |
| On-State Input Voltage (VIH) | — | [DATA_NEEDED: VIH value] |
| Off-State Input Voltage (VIL) | — | [DATA_NEEDED: VIL value] |
| Status Flag Output | — | Open-drain diagnostic output |
| Protection Features | — | ESD, thermal shutdown, over-load current limit |
| MSL स्तर | — | [DATA_NEEDED: MSL level] |