BTS6143DAUMA1 vs BTS70021EPPXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS6143DAUMA1 द्वारा Infineon और BTS70021EPPXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS6143DAUMA1 BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET

BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET

BTS6143DAUMA1 ✓ सक्रिय
Infineon
BTS70021EPPXUMA1 BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon

BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon

BTS70021EPPXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS6143DAUMA1 BTS70021EPPXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (PROFET) —
Number of Channels 1 —
टोपोलॉजी High-Side Smart High-Side Switch, N-Channel MOSFET
आउटपुट कॉन्फ़िगरेशन N-Channel vertical MOSFET —
Nominal Load Voltage (Vbb) 12 V (automotive) —
Operating Voltage Range (Vbb) [DATA_NEEDED: operating voltage range] —
Continuous Output Current (IL) 8 A (typical) —
On-State Resistance (R_DS(on)) [DATA_NEEDED: typical R_DS(on) in mOhm] —
Short-Circuit Protection Yes (with latch) Yes (latched)
Current Limitation Yes —
Overload Protection Yes Yes (current limit)
थर्मल शटडाउन Yes (with auto-restart) —
Overvoltage Protection Yes (including load dump) —
Loss-of-Ground Protection Yes —
Loss-of-Vbb Protection Yes —
Diagnostic Output Yes (status/fault feedback) —
Operating Temperature Range (Tj) -40 C to +150 C —
पैकेज PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-TSDSO-14-22 (exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
Automotive Grade Yes (AEC-Q100 qualified PROFET family) —
Product Family — PROFET+2 12V
Maximum Continuous Load Current — 21 A
On-State Resistance (RDS(on)) — 2.6 mOhm typical
Operating Supply Voltage (Vbb) — 6 V to 18 V
Transient Supply Voltage — 28 V (load dump tolerant)
Standby Current — [DATA_NEEDED: typical uA value]
Current Sense Output (IS) — Analog proportional load current
Fault Output (DEN/IN) — Yes, latched
Reverse Polarity Protection — Yes (ReverSave)
Over-Temperature Protection — Yes (thermal shutdown with restart)
Over-Voltage Protection (Vbb clamp) — Yes
Load Dump Clamp Voltage — 41 V typical
Open-Load Detection — Yes (on-state and off-state)
PWM Capability — Yes, up to [DATA_NEEDED: max PWM frequency]
ऑपरेटिंग तापमान रेंज — -40 C to +150 C junction
Qualification — AEC-Q100 automotive qualified
RoHS स्थिति — Compliant (Green Product)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध