BTS621L1E3128AAUMA1 vs BTS723GWXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS621L1E3128AAUMA1 द्वारा Infineon और BTS723GWXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS621L1E3128AAUMA1 BTS621L1E3128AAUMA1 - 8.5A Smart High-Side Switch 24V | Infineon

BTS621L1E3128AAUMA1 - 8.5A Smart High-Side Switch 24V | Infineon

BTS621L1E3128AAUMA1 ✓ सक्रिय
Infineon
BTS723GWXUMA1 BTS723GWXUMA1 - 2.5A Dual High-Side PROFET Switch | Infineon

BTS723GWXUMA1 - 2.5A Dual High-Side PROFET Switch | Infineon

BTS723GWXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS621L1E3128AAUMA1 BTS723GWXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (PROFET) Smart High-Side Power Switch
Number of Channels 2 2 (dual independent high-side)
Rds(on) per Channel (typ) 8 mΩ —
Continuous Load Current per Channel 8.5 A —
Operating Voltage Range 5 V to 34 V —
Load Dump Protection Up to 42 V —
Input Logic Level CMOS-compatible, ground-referenced —
Diagnostic Feedback Current-mirror IS pin (proportional load current sense) —
On-State Resistance 8 mΩ typical —
पैकेज PG-TO263-7-2 (DPAK-style, 7 leads + tab) PG-DSO-14-37 (14-pin DSO with exposed thermal pad)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान -40 C to +150 C (junction) —
Technology Smart SIPMOS (vertical N-channel FET + charge pump + logic) Classic PROFET™ (SMART7 vertical N-channel)
Protection Features Overload, short-circuit, over-temperature, over-voltage, reverse battery Overload, short circuit, ESD, over-temperature, over-voltage (active clamp)
Automotive Qualification AEC-Q100 (PROFET family) AEC-Q100 qualified
Target Voltage Class 24 V commercial vehicle systems (trucks, tractors, 24V industrial) —
Lead-Free / RoHS Yes (compliant) —
Nominal Operating Voltage (Vbb) — 6 V to 24 V
Load-Dump Survivability (Vbb(load-dump)) — Up to 40 V (per Classic PROFET spec)
Continuous Load Current per Channel (I_L(nom)) — 2.5 A
On-State Resistance per Channel (R_DS(on) typ) — [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login]
Standby Current (I_bb(off)) — Very low (a few µA typical)
Input Logic Compatibility — CMOS-compatible
Diagnostic Output — Current-mirror status / fault flag (shared)
Inductive Load Switching — Active Zener clamp for fast demagnetization
ऑपरेटिंग तापमान रेंज — -40 C to +150 C (junction)
RoHS Compliance — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध