BTS70082EPZXUMA1 vs BTS70402EPGXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS70082EPZXUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS70082EPZXUMA1 BTS70082EPZXUMA1 - Dual 7.5A Smart High-Side Switch | Infineon

BTS70082EPZXUMA1 - Dual 7.5A Smart High-Side Switch | Infineon

BTS70082EPZXUMA1 ✓ सक्रिय
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS70082EPZXUMA1 BTS70402EPGXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies Infineon Technologies
Product Family PROFET+2 (Smart High-Side Switch) —
Number of Channels 2 4
टोपोलॉजी High-Side N-Channel MOSFET Switch —
Continuous Load Current per Channel 7.5 A 3.5 A (typical)
On-Resistance (typ) 9 mOhm —
On-Resistance (max) 18 mOhm —
Operating Supply Voltage (Vbb) 4.1 V to 28 V —
Logic Input Voltage 3.3 V / 5 V compatible —
Turn-On Time (max) 110 us —
Turn-Off Time (max) 100 us —
ऑपरेटिंग तापमान रेंज -40 C to +175 C -40 °C to +150 °C junction
पैकेज PG-TDSO-14-11 (SOIC-14 with exposed pad) PG-TSDSO-14 (exposed thermal pad)
माउंटिंग प्रकार Surface Mount Surface Mount
Protection Features Overcurrent, Overtemperature, Overvoltage, Undervoltage, Reverse Battery (with ext. component) Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Output Current Sense (IS pin) - analog proportional to load current —
AEC-Q100 Qualified Yes —
RoHS स्थिति Compliant —
Part Family — PROFET+2 (BTS70xxx series)
फ़ंक्शन — Smart High-Side Power Switch
आउटपुट कॉन्फ़िगरेशन — High-side, N-channel MOSFET
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध