CP2101 vs CP2104-F03-GMR तुलना
विस्तृत दोनों ओर की तुलना CP2101 द्वारा Silicon Labs और CP2104-F03-GMR द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | CP2101 | CP2104-F03-GMR |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | अंतिम बार खरीदें | सक्रिय |
| फ़ंक्शन | USB to UART Bridge Controller | USB 2.0 to UART bridge controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 full speed, 12 Mbps |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| पैकेज | MLP/QFN-28 (5 x 5 mm) | 24-QFN (4x4 mm) with exposed pad |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature] | -40C to +85C |
| RoHS स्थिति | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| UART Channels | — | 1 |
| Baud Rate Range | — | 300 bps to 2 Mbps (programmable) |
| FIFO Buffer | — | 576 byte |
| सप्लाई वोल्टेज | — | 3 V to 3.6 V (VDD) |
| I/O Supply (VIO) | — | 1.8 V, 3 V to 3.6 V |
| On-Chip Regulator Output | — | 3.45 V |
| Non-Volatile Memory | — | 1024 byte one-time-programmable ROM |
| GPIO | — | 4 digital I/O pins |
| Flow Control | — | ~RTS, ~CTS, ~DTR, ~DSR, ~DCD, ~RI |
| माउंटिंग प्रकार | — | Surface Mount |
| Integrated Clock | — | Yes (no external crystal required) |
| Integrated USB Transceiver | — | Yes (no external resistors required) |
| Power-On Reset | — | On-chip |