DRV8816PWP vs TMP816PWR तुलना
विस्तृत दोनों ओर की तुलना DRV8816PWP द्वारा Texas Instruments और TMP816PWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
DRV8816PWP - 40V Dual Half-H Bridge Motor Driver | Texas Instruments
DRV8816PWP ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | DRV8816PWP | TMP816PWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Motor Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Motor Driver Architecture | Dual 1/2-H Bridge (two independent half bridges) | — |
| Supply Voltage (VM) | 8 V to 38 V | — |
| Absolute Maximum VM | 40 V | — |
| Output Current per Channel | 2.8 A peak (per half bridge) | — |
| On-Resistance (HS + LS per output) | [DATA_NEEDED: RDSon per MOSFET] | — |
| Logic Input Voltage (VDD) | 3.3 V / 5 V compatible | — |
| इंटरफ़ेस | Parallel (INx / ENx per half bridge) | — |
| PWM Frequency | Up to 200 kHz | — |
| Current Sense | Integrated (external Rsense) | — |
| Protection Features | UVLO, thermal shutdown, shoot-through protection, fault flag | Thermal shutdown, adjustable current limit, lock-rotor protection |
| ऑपरेटिंग तापमान | -40 C to +85 C | — |
| पैकेज | HTSSOP-16 (PWP) with PowerPAD | 20-pin TSSOP (PW), 4.40 mm width |
| Thermal Resistance (theta_JA) | [DATA_NEEDED: theta_JA from datasheet] | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 2 | 1 (unlimited floor life at <30 °C / 85 % RH) |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | Yes |
| टोपोलॉजी | — | Single-phase full-wave BLDC fan predriver |
| Supply Voltage (VCC) | — | 6 V to 16 V |
| Maximum Supply Voltage | — | 18 V |
| Load Voltage | — | 10 V |
| Output Current | — | 20 mA (gate drive to external PNP+NMOS) |
| आउटपुट की संख्या | — | 1 (pre-driver output pair) |
| Current Limit Threshold | — | Adjustable (external resistor) |
| ऑपरेटिंग तापमान रेंज | — | -30 °C to +95 °C |
| Control Input | — | PWM speed command |
| Tachometer Output | — | FG (frequency-generator) signal |
| External Power Stage | — | PNP + N-channel MOSFET pair |
| Drive Method | — | Full-wave, sensored (Hall-element input) |