DRV8816PWP vs TMP816PWR So sánh

So sánh chi tiết song song của DRV8816PWP bằng Texas Instruments và TMP816PWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DRV8816PWP DRV8816PWP - 40V Dual Half-H Bridge Motor Driver | Texas Instruments

DRV8816PWP - 40V Dual Half-H Bridge Motor Driver | Texas Instruments

DRV8816PWP ✓ Hoạt động
Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DRV8816PWP TMP816PWR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Motor Driver Architecture Dual 1/2-H Bridge (two independent half bridges) —
Supply Voltage (VM) 8 V to 38 V —
Absolute Maximum VM 40 V —
Output Current per Channel 2.8 A peak (per half bridge) —
On-Resistance (HS + LS per output) [DATA_NEEDED: RDSon per MOSFET] —
Logic Input Voltage (VDD) 3.3 V / 5 V compatible —
Giao diện Parallel (INx / ENx per half bridge) —
PWM Frequency Up to 200 kHz —
Current Sense Integrated (external Rsense) —
Protection Features UVLO, thermal shutdown, shoot-through protection, fault flag Thermal shutdown, adjustable current limit, lock-rotor protection
Nhiệt độ hoạt động -40 C to +85 C —
Hộp HTSSOP-16 (PWP) with PowerPAD 20-pin TSSOP (PW), 4.40 mm width
Thermal Resistance (theta_JA) [DATA_NEEDED: theta_JA from datasheet] —
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 2 1 (unlimited floor life at <30 °C / 85 % RH)
Trạng thái RoHS Compliant Compliant
Lead-Free Yes Yes
Cấu trúc — Single-phase full-wave BLDC fan predriver
Supply Voltage (VCC) — 6 V to 16 V
Maximum Supply Voltage — 18 V
Load Voltage — 10 V
Output Current — 20 mA (gate drive to external PNP+NMOS)
Số lượng đầu ra — 1 (pre-driver output pair)
Current Limit Threshold — Adjustable (external resistor)
Khoảng nhiệt độ hoạt động — -30 °C to +95 °C
Control Input — PWM speed command
Tachometer Output — FG (frequency-generator) signal
External Power Stage — PNP + N-channel MOSFET pair
Drive Method — Full-wave, sensored (Hall-element input)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá