EPC1441PCB vs EPC1PC8-NW तुलना
विस्तृत दोनों ओर की तुलना EPC1441PCB द्वारा Altera और EPC1PC8-NW द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC1441PCB | EPC1PC8-NW |
|---|---|---|
| ब्रांड | Altera | Intel |
| श्रेणी | FPGA & CPLD | Memory ICs |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Device Type | Enhanced Configuration Device for SRAM FPGAs | — |
| Memory Density | 4,435,200 bits (~4 Mb) | — |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, FLEX 8000, Mercury | — |
| Programmability | In-system programmable via JTAG (IEEE 1149.1) | — |
| Configuration Interface | Altera serial/parallel configuration bus (nSTATUS, nCONFIG, DCLK, DATA) | — |
| Supply Voltage (VCC) | 3.3 V nominal | 3.0 V to 5.5 V (3.3 V or 5 V nominal) |
| I/O Voltage Tolerance | 5 V tolerant | — |
| पैकेज | PLCC-20 (Plastic Leaded Chip Carrier) | 8-pin PDIP (300-mil body, through-hole) |
| माउंटिंग प्रकार | Surface Mount / Socket | — |
| ऑपरेटिंग तापमान | 0 C to +70 C (commercial) | 0C to +70C (commercial) |
| Configuration Mode | Automatic at power-up | — |
| Architecture | Flash memory + on-chip configuration controller | — |
| JTAG Support | Yes (IEEE 1149.1 boundary scan) | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | Compliant (Pb-free -NW suffix) |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | OTP Configuration PROM (one-time programmable) |
| मेमोरी आकार | — | 1 Mbit (1,046,496 bits) |
| इंटरफ़ेस | — | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| पिन काउंट | — | 8 |
| Configuration Mode Support | — | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families |
| Oscillator | — | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) |
| JTAG Boundary-Scan Support | — | No (EPC2 family only) |
| Programming Method | — | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II |
| Lead Finish | — | Pb-free matte tin (JEDEC J-STD-020 compliant) |
| MSL स्तर | — | MSL 2 (per JEDEC J-STD-020) |
| Manufacturer | — | Intel (formerly Altera Corporation) |
| Compatible FPGA Families | — | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B |