EPC1PC8CC vs EPC1LLC20 तुलना

विस्तृत दोनों ओर की तुलना EPC1PC8CC द्वारा Intel और EPC1LLC20 द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

विशेषता तुलना

पैरामीटर EPC1PC8CC EPC1LLC20
ब्रांड Intel Intel
श्रेणी Memory ICs Memory ICs
लाइफसाइकिल स्थिति Obsolete Obsolete
मेमोरी आकार 1 Mbit (1,048,576 bits) 1 Mbit (1,048,576 bits)
मेमोरी प्रकार EPROM (OTP, UV-erasable window optional) Serial Configuration Flash
फ़ंक्शन FPGA Configuration PROM —
Configuration Interface Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) —
Supply Voltage VCC 3.0 V to 3.6 V (typical 3.3 V) —
Maximum DCLK Frequency 17.6 MHz (17.6 Mb/s effective bitstream rate) —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: full industrial range from datasheet] —
पैकेज PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) 20-pin PLCC (LLC)
माउंटिंग प्रकार Through-Hole (DIP socketable) Surface Mount (PLCC socket or solder)
Cascade Support Not supported in DIP-8 package (nCASC pin not exposed) —
Programming Interface JTAG via Altera Quartus / Quartus Prime ByteBlaster —
Error Detection Built-in CRC during configuration transfer —
MSL स्तर 1 (unlimited floor life) [DATA_NEEDED: MSL moisture sensitivity level]
Lead-Free / RoHS Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant [DATA_NEEDED: RoHS compliance status]
Compatible FPGA Families ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria —
पिन काउंट 8 —
इंटरफ़ेस — Altera Serial Configuration (4-wire)
Serial Clock Frequency — 8 MHz maximum
Supply Voltage (VCC) — 2.7 V to 3.6 V (3.3 V typical)
Programming Cycles Endurance — 100,000 cycles minimum
Data Retention — 20 years minimum
ऑपरेटिंग तापमान — [DATA_NEEDED: operating temperature range]
Programming Mode — In-system via serial interface
Configuration Compatibility — Altera FLEX, ACEX, APEX, Cyclone, Mercury
Standby Current — [DATA_NEEDED: standby current]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध