EPC1PC8CC vs EPC1LLC20 比較
詳細並排比較 EPC1PC8CC 由 Intel 與 EPC1LLC20 由 Intel. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC1PC8CC | EPC1LLC20 |
|---|---|---|
| 品牌 | Intel | Intel |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | Obsolete | Obsolete |
| 記憶體容量 | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| 記憶體類型 | EPROM (OTP, UV-erasable window optional) | Serial Configuration Flash |
| 功能 | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | — |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| 工作溫度範圍 | [DATA_NEEDED: full industrial range from datasheet] | — |
| 封裝 | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 20-pin PLCC (LLC) |
| 安裝類型 | Through-Hole (DIP socketable) | Surface Mount (PLCC socket or solder) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| MSL 等級 | 1 (unlimited floor life) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | [DATA_NEEDED: RoHS compliance status] |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| 腳位數 | 8 | — |
| 介面 | — | Altera Serial Configuration (4-wire) |
| Serial Clock Frequency | — | 8 MHz maximum |
| Supply Voltage (VCC) | — | 2.7 V to 3.6 V (3.3 V typical) |
| Programming Cycles Endurance | — | 100,000 cycles minimum |
| Data Retention | — | 20 years minimum |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| Programming Mode | — | In-system via serial interface |
| Configuration Compatibility | — | Altera FLEX, ACEX, APEX, Cyclone, Mercury |
| Standby Current | — | [DATA_NEEDED: standby current] |