INA122U vs AD623ANZ तुलना
विस्तृत दोनों ओर की तुलना INA122U द्वारा Texas Instruments और AD623ANZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | INA122U | AD623ANZ |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Precision instrumentation amplifier | Instrumentation amplifier |
| Architecture | Two-op-amp design | — |
| Supply Voltage Range | 2.2 V to 36 V | 2.7 V to 12 V |
| Single-Supply Operation | 2.2 V to 36 V | — |
| Dual-Supply Operation | ±18 V | Supported |
| क्वाइसेंट करंट | 60 µA typical | — |
| Common-Mode Range | (V−) − 0.1 V | — |
| Output Swing | Rail-to-rail output swing | Rail-to-rail |
| Offset Voltage | 250 µV maximum | — |
| Offset Drift | 3 µV/°C maximum | — |
| Noise | Low noise | — |
| Circuit Count | 1 circuit | — |
| पैकेज | 8-SOIC | 8-PDIP |
| Terminal Count | 8 terminals | — |
| माउंटिंग प्रकार | Surface mount | — |
| Application Category | Portable medical and data acquisition | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |