INA126P vs INA2126UG4 तुलना

विस्तृत दोनों ओर की तुलना INA126P द्वारा Texas Instruments और INA2126UG4 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
INA126P INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P ✓ सक्रिय
Texas Instruments
INA2126UG4 INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 ✓ सक्रिय

विशेषता तुलना

पैरामीटर INA126P INA2126UG4
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Precision micropower instrumentation amplifier —
Architecture Two-op-amp instrumentation amplifier Two-op-amp instrumentation-amplifier design
Maximum Supply Voltage 36 V 36 V
Supply Voltage Range ±1.35 V to ±18 V ±1.35 V to ±18 V
क्वाइसेंट करंट 175 µA/channel typical 175 µA per channel
Input Offset Voltage 250 µV —
Programmable Gain 1, 10, 100, or 1000 using external resistor —
Differential Signal Acquisition Precision low-noise differential input —
Channel Count 1 channel 2 channels
पैकेज 8-pin PDIP 16-pin SOIC, 3.90 mm width
Terminal Count 8 terminals —
माउंटिंग प्रकार Through-hole Surface mount
Package Shape Rectangular DIP —
Temperature Grade Industrial —
Application Class Portable instrumentation and data acquisition —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — Dual precision instrumentation amplifier
Single-Supply Minimum — 2.7 V
Offset Voltage — 250 µV
Input Type — Differential
Signal Type — Low-level differential-signal acquisition
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Gain Settings — [DATA_NEEDED: available gain settings]
Input Common-Mode Range — [DATA_NEEDED: input common-mode range]
आउटपुट वोल्टेज रेंज — [DATA_NEEDED: output voltage range]
Gain Error — [DATA_NEEDED: gain error]
Noise Performance — [DATA_NEEDED: input noise density]
Bandwidth — [DATA_NEEDED: signal bandwidth]
Slew Rate — [DATA_NEEDED: slew rate]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध