INA126P vs INA2126UG4 So sánh

So sánh chi tiết song song của INA126P bằng Texas Instruments và INA2126UG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA126P INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P ✓ Hoạt động
Texas Instruments
INA2126UG4 INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA126P INA2126UG4
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Precision micropower instrumentation amplifier —
Architecture Two-op-amp instrumentation amplifier Two-op-amp instrumentation-amplifier design
Maximum Supply Voltage 36 V 36 V
Supply Voltage Range ±1.35 V to ±18 V ±1.35 V to ±18 V
Điện áp yên tĩnh 175 µA/channel typical 175 µA per channel
Input Offset Voltage 250 µV —
Programmable Gain 1, 10, 100, or 1000 using external resistor —
Differential Signal Acquisition Precision low-noise differential input —
Channel Count 1 channel 2 channels
Hộp 8-pin PDIP 16-pin SOIC, 3.90 mm width
Terminal Count 8 terminals —
Kiểu lắp đặt Through-hole Surface mount
Package Shape Rectangular DIP —
Temperature Grade Industrial —
Application Class Portable instrumentation and data acquisition —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — Dual precision instrumentation amplifier
Single-Supply Minimum — 2.7 V
Offset Voltage — 250 µV
Input Type — Differential
Signal Type — Low-level differential-signal acquisition
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Gain Settings — [DATA_NEEDED: available gain settings]
Input Common-Mode Range — [DATA_NEEDED: input common-mode range]
Khoảng điện áp đầu ra — [DATA_NEEDED: output voltage range]
Gain Error — [DATA_NEEDED: gain error]
Noise Performance — [DATA_NEEDED: input noise density]
Bandwidth — [DATA_NEEDED: signal bandwidth]
Slew Rate — [DATA_NEEDED: slew rate]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá