KSZ9031MNXCC vs KSZ9031RNXUB-VAO तुलना
विस्तृत दोनों ओर की तुलना KSZ9031MNXCC द्वारा Microchip Technology और KSZ9031RNXUB-VAO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
KSZ9031MNXCC - Gigabit Ethernet PHY Transceiver 64-QFN | Microchip
KSZ9031MNXCC ✓ सक्रियMicrochip Technology
KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip
KSZ9031RNXUB-VAO ✓ सक्रियविशेषता तुलना
| पैरामीटर | KSZ9031MNXCC | KSZ9031RNXUB-VAO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Ethernet PHY Transceiver | Ethernet Physical Layer Transceiver (PHY) |
| डेटा दर | 10/100/1000 Mbps | 10/100/1000 Mbps (triple-speed) |
| Network Standard | IEEE 802.3 (10Base-T/100Base-TX/1000Base-T) | — |
| MAC Interface | GMII / MII | RGMII (Reduced Gigabit Media Independent Interface) |
| I/O Voltage Tolerance | 3.3V / 2.5V / 1.8V | — |
| सप्लाई वोल्टेज | 3.3V (single supply) | [DATA_NEEDED: supply voltage] |
| Power Consumption (Typical) | ~0.7W at 1000 Mbps full-duplex | — |
| Auto-Negotiation | Yes (10/100/1000 Mbps) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Wake-on-LAN | Yes | Yes, with custom-packet detection |
| LED Interface | Programmable multi-LED | — |
| ऑपरेटिंग तापमान | 0C to +70C (commercial grade, CC suffix) | -40C to +85C (automotive AEC-Q100 grade) |
| पैकेज | 64-pin QFN (8x8 mm), lead-free | 48-pin WQFN (7x7 mm), lead-free |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | Compliant | Compliant |
| Standards Supported | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| Cable Type | — | CAT-5 UTP (unshielded twisted pair) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Power Consumption (Active) | — | [DATA_NEEDED: typical active power] |
| Power Consumption (Energy-Detect) | — | ~75 mW when cable not attached |
| Reference Clock Output | — | 125 MHz |
| On-chip Termination Resistors | — | Yes (integrated MDI termination) |
| LED Outputs | — | Programmable (link/activity/speed) |
| Loopback Modes | — | Remote and local loopback |
| Baseline Wander Correction | — | Integrated |
| Adaptive Equalization | — | Integrated |
| Lead-Free | — | Yes |