KSZ9031MNXCC vs KSZ9031RNXUB-VAO Perbandingan
Perbandingan bersamaan detil KSZ9031MNXCC dari Microchip Technology dan KSZ9031RNXUB-VAO dari Microchip Technology. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Microchip Technology
KSZ9031MNXCC - Gigabit Ethernet PHY Transceiver 64-QFN | Microchip
KSZ9031MNXCC ✓ AktifMicrochip Technology
KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip
KSZ9031RNXUB-VAO ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | KSZ9031MNXCC | KSZ9031RNXUB-VAO |
|---|---|---|
| Merek | Microchip Technology | Microchip Technology |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Ethernet PHY Transceiver | Ethernet Physical Layer Transceiver (PHY) |
| Laju Data | 10/100/1000 Mbps | 10/100/1000 Mbps (triple-speed) |
| Network Standard | IEEE 802.3 (10Base-T/100Base-TX/1000Base-T) | — |
| MAC Interface | GMII / MII | RGMII (Reduced Gigabit Media Independent Interface) |
| I/O Voltage Tolerance | 3.3V / 2.5V / 1.8V | — |
| Tegangan Pemuat | 3.3V (single supply) | [DATA_NEEDED: supply voltage] |
| Power Consumption (Typical) | ~0.7W at 1000 Mbps full-duplex | — |
| Auto-Negotiation | Yes (10/100/1000 Mbps) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Wake-on-LAN | Yes | Yes, with custom-packet detection |
| LED Interface | Programmable multi-LED | — |
| Suhu Kerja | 0C to +70C (commercial grade, CC suffix) | -40C to +85C (automotive AEC-Q100 grade) |
| Paket | 64-pin QFN (8x8 mm), lead-free | 48-pin WQFN (7x7 mm), lead-free |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Compliant | Compliant |
| Standards Supported | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| Cable Type | — | CAT-5 UTP (unshielded twisted pair) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Power Consumption (Active) | — | [DATA_NEEDED: typical active power] |
| Power Consumption (Energy-Detect) | — | ~75 mW when cable not attached |
| Reference Clock Output | — | 125 MHz |
| On-chip Termination Resistors | — | Yes (integrated MDI termination) |
| LED Outputs | — | Programmable (link/activity/speed) |
| Loopback Modes | — | Remote and local loopback |
| Baseline Wander Correction | — | Integrated |
| Adaptive Equalization | — | Integrated |
| Lead-Free | — | Yes |