LM224DG vs LM324D तुलना

विस्तृत दोनों ओर की तुलना LM224DG द्वारा onsemi और LM324D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
LM324D LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

LM324D ✓ सक्रिय

विशेषता तुलना

पैरामीटर LM224DG LM324D
ब्रांड onsemi Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Quad operational amplifier —
Number of Channels 4 circuits —
Amplifier Type General-purpose operational amplifier Quad general-purpose operational amplifier
Gain-Bandwidth Product 1 MHz —
Supply Voltage Range 3 V to 32 V 3 V to 36 V for B versions
Input Offset Voltage 5 mV Plus or minus 2 mV maximum for BA versions at 25 C
Common-Mode Rejection Ratio 70 dB minimum —
Input Type True differential inputs Differential input
Supply Configuration Single supply or split supply Single supply or split supply
Compensation Internally frequency compensated —
पैकेज 14-pin SOIC, 0.154 inch (3.90 mm) width 14-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज -25 C to +85 C [DATA_NEEDED: operating temperature range]
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Amplifiers — 4
Architecture — Four independent high-gain frequency-compensated operational amplifiers
ESD Protection — 2 kV HBM for B, BA, and K versions
Input Filtering — Internal RF and EMI filter for B and BA versions
Frequency Compensation — Internal
Device Type — Low-power operational amplifier
आउटपुट प्रकार — Single-ended output
Operating Class — Standard general purpose
AEC-Q100 Status — [DATA_NEEDED: AEC-Q100 qualification status]
Gain Bandwidth Product — [DATA_NEEDED: gain bandwidth product]
Input Bias Current — [DATA_NEEDED: input bias current]
Slew Rate — [DATA_NEEDED: slew rate]
Output Current — [DATA_NEEDED: output current]
Common-Mode Input Range — [DATA_NEEDED: common-mode input range]
Output Swing — [DATA_NEEDED: output swing]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध