LM3886TF vs LM2876TF तुलना

विस्तृत दोनों ओर की तुलना LM3886TF द्वारा Texas Instruments और LM2876TF द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
LM3886TF LM3886TF - 68W Mono Class-AB Audio Amplifier w/ Mute | Texas Instruments

LM3886TF - 68W Mono Class-AB Audio Amplifier w/ Mute | Texas Instruments

LM3886TF ✓ सक्रिय
Texas Instruments
LM2876TF LM2876TF - 40W Mono Class AB Amplifier | Texas Instruments

LM2876TF - 40W Mono Class AB Amplifier | Texas Instruments

LM2876TF ✓ सक्रिय

विशेषता तुलना

पैरामीटर LM3886TF LM2876TF
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
आउटपुट प्रकार Mono, single channel —
टोपोलॉजी Class-AB —
Output Power (Continuous Average) 68 W into 4Ω —
Output Power (8Ω) 38 W —
Supply Voltage Range 20 V to 94 V (single), ±10 V to ±47 V (split) 20 V to 60 V
THD+N 0.1 % (at full output, 20 Hz–20 kHz) —
Load Impedance 4 Ω to 8 Ω 8 ohm
Signal-to-Noise Ratio 92 dB (minimum) —
Internal Gain 26 dB (adjustable with external resistors) —
Mute Pin Yes (active high) —
SPiKe Protection Short-circuit, thermal, over-voltage, under-voltage —
ऑपरेटिंग तापमान रेंज 0 °C to +70 °C [DATA_NEEDED: operating temperature range]
पैकेज TO-220-11 Isolated (KC) —
माउंटिंग प्रकार Through-Hole Through-hole
पिन की संख्या 11 11 pins
Product Type — Mono audio power amplifier IC
Manufacturer — Texas Instruments
Amplifier Class — Class AB
Number of Channels — 1 channel
Continuous Average Output Power — 40 W
Total Harmonic Distortion Plus Noise — 0.1% at 40 W into 8 ohm from 20 Hz to 20 kHz
Frequency Range — 20 Hz to 20 kHz
Mute Function — Yes
Protection Technology — SPiKe Self Peak Instantaneous Temperature protection
Package Type — TO-220-11 isolated package
थर्मल रेज़िस्टेंस — [DATA_NEEDED: thermal resistance]
Quiescent Supply Current — [DATA_NEEDED: quiescent supply current]
Output Impedance — [DATA_NEEDED: output impedance]
Gain Configuration — [DATA_NEEDED: gain configuration]
RoHS स्थिति — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध