LM3886TF vs LM2876TF Perbandingan
Perbandingan bersamaan detil LM3886TF dari Texas Instruments dan LM2876TF dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM3886TF - 68W Mono Class-AB Audio Amplifier w/ Mute | Texas Instruments
LM3886TF ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM3886TF | LM2876TF |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tipe Output | Mono, single channel | — |
| Topologi | Class-AB | — |
| Output Power (Continuous Average) | 68 W into 4Ω | — |
| Output Power (8Ω) | 38 W | — |
| Supply Voltage Range | 20 V to 94 V (single), ±10 V to ±47 V (split) | 20 V to 60 V |
| THD+N | 0.1 % (at full output, 20 Hz–20 kHz) | — |
| Load Impedance | 4 Ω to 8 Ω | 8 ohm |
| Signal-to-Noise Ratio | 92 dB (minimum) | — |
| Internal Gain | 26 dB (adjustable with external resistors) | — |
| Mute Pin | Yes (active high) | — |
| SPiKe Protection | Short-circuit, thermal, over-voltage, under-voltage | — |
| Rentang Suhu Kerja | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| Paket | TO-220-11 Isolated (KC) | — |
| Tipe Mounting | Through-Hole | Through-hole |
| Jumlah Pin | 11 | 11 pins |
| Product Type | — | Mono audio power amplifier IC |
| Manufacturer | — | Texas Instruments |
| Amplifier Class | — | Class AB |
| Number of Channels | — | 1 channel |
| Continuous Average Output Power | — | 40 W |
| Total Harmonic Distortion Plus Noise | — | 0.1% at 40 W into 8 ohm from 20 Hz to 20 kHz |
| Frequency Range | — | 20 Hz to 20 kHz |
| Mute Function | — | Yes |
| Protection Technology | — | SPiKe Self Peak Instantaneous Temperature protection |
| Package Type | — | TO-220-11 isolated package |
| Tahanan Panas | — | [DATA_NEEDED: thermal resistance] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Gain Configuration | — | [DATA_NEEDED: gain configuration] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |