LTC2313HTS8-14 vs LTC2309IF तुलना
विस्तृत दोनों ओर की तुलना LTC2313HTS8-14 द्वारा Analog Devices और LTC2309IF द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
LTC2313HTS8-14 - 14-bit 2.5Msps SAR ADC in TSOT-23-8 | Analog Devices
LTC2313HTS8-14 ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | LTC2313HTS8-14 | LTC2309IF |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 14 bits | 12 bit |
| Sample Rate | 2.5 Msps | — |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Number of Input Channels | 1 (single-ended/differential) | 8 single-ended / 4 differential |
| सप्लाई वोल्टेज | 3 V to 5 V (single supply, 5 V typical) | — |
| सप्लाई करंट | 5 mA at 2.5 Msps | 300 uA at 1 ksps (typical) |
| Input Type | Pseudo-differential (IN+, IN-) | — |
| Internal Reference | 2.5 V nominal, 20 ppm/°C max drift | 2.5 V, 10 ppm/C typical drift |
| Serial Interface | SPI-compatible SCK/SDO/SDI/CSF, supports 1.8 V/2.5 V/3 V/5 V logic | — |
| No-Missing-Codes Performance | 14 bits guaranteed | — |
| Latency | 0 conversion latency | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C (H-grade) | — |
| पैकेज | TSOT-23-8 (HTS8) | 20-TSSOP (FE) |
| माउंटिंग प्रकार | Surface Mount | — |
| MSL स्तर | 1 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | Compliant (PBF suffix) |
| Conversion Cycles | 16 SCK per conversion (14-bit plus 2 dummy bits) | — |
| Conversion Time | — | 1.3 us per channel (typical) |
| Throughput Rate | — | up to 500 ksps (datasheet-dependent) |
| Supply Voltage (VDD) | — | 5 V single supply |
| Digital Interface | — | I2C-compatible, standard / fast / high-speed modes |
| I2C Address Selection | — | 2 pins (AD0, AD1) - up to 4 devices on one bus |
| External Reference Input (REFIN) | — | Yes, supports ratiometric operation |
| Sample-and-Hold | — | Fully differential, common-mode noise rejection |
| Analog Input Range | — | 0 V to VDD (unipolar); +/-VREF differential |
| Operating Temperature Range (I grade) | — | -40 C to +85 C |
| शटडाउन करंट | — | Nap / I2C power-down supported |